Your position: Homepage - Exhaust fan

the wind machine

We draw domestic and foreign companies in the advantages of similar products based on the development of animal husbandry and utility model fan, fans of the series with full pressure, air volume, low noise, smooth energy saving, running, shutters open and close automatically, maintenance and convenient. Of animals discounted longitudinal and transverse ventilation can apply, it is the ideal indoor aquaculture farming equipment today products. Fans of the series at the same time is also widely used in industrial ventilation plants, warehouses and other places. The company developed a material made of stainless steel frame, shutters, fan pages, and other components of stainless steel series fan, suitable for moisture, there are corrosive gases in harsh environment use. 


Sketch map of fan


 1. fan in the proper use checks once a year, to be re-used for long-term disabled, should be thoroughly checked to see whether the deformation of blades, the connecting member is loose, rotating parts is flexible, wire epidermal damage or aging.
2. the bearing grease should be added annually.
3、the fan should be dry storage place, avoid rain, fog, humidity, water droplets immersed motor to prevent damage to the motor insulation and metal corrosion, long-term parking and then test the insulation resistance should be not less than 2 megohms, if less than 2 megohms It must be dried.
4、found fan vibration, check the fan blade is deformed head, impeller and shaft connector is loose head or shaft bending, fixing bolts are loose.
5.the user in compliance with the custody, use, installation, under prescribed conditions of transport, within one year from date of shipment, the product is damaged or not working, by the identification of the factory due to poor manufacturing, the company for free repair or replacement machine.

Unique centrifugal mechanism that automatically opens and closes the shutters blades, blade louvers 100% level to ensure open, no wind resistance
Using stamping molding process, a one-time stamping stainless steel blades ensure that the same blades
Balancing correction instrument blade assembly in the money test, to ensure the smooth operation of the fan, low noise, long life
Configuring Chinese famous brand motor, through the CCC Protection class: IP55, insulation class: F
Centrifugal mechanism with high toughness, long life Jiaqing nylon injection molding processing, a good high strength, toughness, long life
Centrifugal system guide rods embedded stainless steel core, ensure the guide bar is not broken, not damaged, long service life


specifications and models

Fandiameter  mm

Fanspeed rpm

Motorspeed rpm

Motor speedm/h

total head
Pa

The noise decibel

The input powerw

The rated voltage

height
mm

width mm

thickness
mm

DJF-1000(39〃)

910

438

1400

21000

57

≤65

550

380

1000

1000

450

DJF-1380(54〃)

1250

437

1400

44000

57

≤65

1100

380

1380

1380

450

UP: Supension type fan
DOWN: The new bullpen fan
Address:Shandong qingzhou east road west(309the national roadnorth500meter) TEL:0536-3529853 faxes:0536-3529387 All rights reserved:Qingzhou Jinlong Temperature Control Equipment Co., Ltd.   Technical support:Fangyuan netcom  The background login
open